StarTech.com Raspberry Pi Board - USB 2.0 480Mbps - USB to M.2 SATA Converter - USB to SATA Raspberry Pi SSD (PIB2M21) - Storage controller - M.2 Card - USB 2.0 - red
StarTech.com Raspberry Pi Board - USB 2.0 480Mbps - USB to M.2 SATA Converter - USB to SATA Raspberry Pi SSD (PIB2M21) - Storage controller - M.2 Card - USB 2.0 - red
Ražotāja kods:
PIB2M21
SKU:
M1160086
Garantija:
Bez PVNAr PVN
€ 51,16€ 42,28
Pieejami 5+ gab.
28. martā
Ja pamani neprecizitāti mājas lapā, lūdzu, informē mūs!
Connect an M.2 SATA drive to your development board, to increase data storage capacity. Increase the data storage capacity of your Raspberry Pi or other development board, by connecting it directly to an M.2 NGFF SATA SSD. Perfect for custom projects and applications, this USB to M.2 SATA converter supports all models of Raspberry Pi as well as other development boards. This convenient USB 2.0 to M.2 SATA converter lets you overcome data storage limitations of your development board by enabling you to connect an M.2 SATA drive through your board's USB-A port. The USB to M.2 SATA converter integrates seamlessly with your existing development board. It's the perfect addition for development-board based applications such as surveillance, media players and servers, digital signage and IoT/automation solutions. It enables you to utilize your M.2 SATA drives with your dev board, and take advantage of the small form factor of M.2 SATA which makes it ideal for applications with space limitations. Compatible with M.2 SATA drives (2230, 2242, 2260, and 2280), the converter is easy to install and doesn't require any device driver installation. It comes with a USB cable and all mounting accessories, including standoffs, so integrating it with your Raspberry Pi is fast and easy. This converter works with M.2 SATA SSDs only. To see which type of M.2 drive you have, simply look at the number of notches (or keys) on the drive end that connects with the M.2 socket. SATA-based M.2 drives have two notches (an M key and a B key), while PCIe-based M.2 drives have just one notch (an M key).
Connect an M.2 SATA drive to your development board, to increase data storage capacity. Increase the data storage capacity of your Raspberry Pi or other development board, by connecting it directly to an M.2 NGFF SATA SSD. Perfect for custom projects and applications, this USB to M.2 SATA converter supports all models of Raspberry Pi as well as other development boards.
Ražotājs
StarTech.com
Produkta līnija
StarTech.com
Krāsa
Sarkana
Ražotāja kods
0065030867849
Produkta līnija
StarTech.com
Ražotājs
StarTech.com
Produkta tips
Storage controller
Storage Controller / Form Factor
Internal
Storage Controller / Supported Devices
Solid state drive
Storage Controller / Host Bus
USB 2.0
Storage Controller / Interface
M.2 Card
Krāsa
Sarkana
Dimensijas / Platums
8
Dimensijas / Dziļums
1.1
Dimensijas / Augstums
8.8
Krāsa
Red
Header / Model
Raspberry Pi Board - USB 2.0 480Mbps - USB to M.2 SATA Converter - USB to SATA Raspberry Pi SSD (PIB2M21)
Capital nodrošina Patērētāju tiesības – 24 mēnešus precēm, uz kurām tās attiecināmas. Vairāk lasi šeit
Tīmekļa vietnē saglabāsies tehniskās sīkdatnes, kuras ir nepieciešamas, lai nodrošinātu tīmekļa vietnes darbību un kuru izmantošanai nav nepieciešams iegūt lietotāja piekrišanu.
Mēs izmantojam savas un trešo pušu sīkdatnes, lai uzlabotu tīmekļa vietnes lietošanas funkcionalitāti, lai iegūtu datus par apmeklētāju plūsmu, un lai saglabātu tavu iepirkšanās vēsturi un izmantotu informāciju par tevis iepriekš iegādātajiem produktiem, lai ieteiktu tev citus produktus, kuri, mūsuprāt, tevi interesēs. Uzzināt vairāk par mūsu sīkdatņu noteikumiem vari šeit.
Papildu informāciju par mūsu privātuma politiku pieejama šeit.
Tīmekļa vietnē saglabāsies tehniskās sīkdatnes, kuras ir nepieciešamas, lai nodrošinātu tīmekļa vietnes darbību un kuru izmantošanai nav nepieciešams iegūt lietotāja piekrišanu.