Lanberg RSFE-16P-2C-250 - Switch - unmanaged - 16 x 10/100 (PoE+) + 2 x combo Gigabit SFP/RJ-45 (uplink) - rack-mountable - PoE+ (250 W)
Aizdevuma summa:
Termiņš: mēn.
Ikmēneša maksājums:
Kopējā atmaksājamā summa:
Procentu likme: %
Gada procentu likme (GPL): %
Komisijas maksa:
Aprēķiniem ir tikai informatīvs raksturs, un katra klienta situācija tiek izvērtēta individuāli. Kreditēšanas pakalpojumu, izmantojot Klix, sniedz AS Citadele banka, AS Lateko Līzings vai SIA Aizdevums.lv
PoE+ switch is an indispensable active device in any network structure, using power transmission through structured cabling. RSFE-16P-2C-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular will find use in alarm, fire and access control infrastructure.
In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in PoE/PoE+ - 802.3af and at standards. This makes it possible to provide up to 250 watts of total power to devices. And all this together with simultaneous data transmission to them.
This saves resources, space and the time it would take to install a separate electrical and network installation. This is especially important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors.
- A solution without compromise
- Intelligent PoE port disconnect function
- Extend mode
- 6 kV surge protection
- A solution without compromise
The switch is equipped with a total of 18 ports, including 16 PoE+ (Fast Ethernet) ports and 2 Uplink (Combo Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 watts of total real power for end devices. - Intelligent PoE port disconnect function
It is not always entirely clear how the switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or the random or latest connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg in the RS series switches has introduced an innovative solution that, through the simplicity of the principle of operation, eliminates any doubt about the mechanics of the operation of the ports. At the moment when the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads does not exceed the available budget; keeping the operation of the remaining ports intact. Those that are disconnected will remain in this state until the PoE load decreases. - Extend mode
Standard switches, according to the standard, provide the ability to operate devices at distances of up to 100 meters on a single cable run. However, sometimes it turns out that due to the extensive backbone network and complex environment, a custom solution that goes beyond the standard is required during cabling and network development. In the case of monitoring solutions, this is a fairly common problem, most often due to the excessive distance between the distribution device and the end device. Lanberg switches have a feature that allows data (max. 10 Mbps) and PoE+ power transmission up to 250 m on a single cable segment with PoE port separation between each other (VLAN). Simply switch the button to the "PoE+ Extend 250 m" position on the housing to ensure operation over a longer distance and separation for ports 1 ~ 16. - 6 kV surge protection
The switch itself, as well as the devices connected to it, are repeatedly exposed to various hazards, including power discharges that can flow through both power and network cables. With the safety of the devices as well as their users in mind, Lanberg has equipped the switch with an integrated discharge protection circuit, providing 6 kV protection for all ports, effectively reducing their damage from surges. Under standard conditions, network operation will continue uninterrupted, the switch will continue to work without any interruptions, and the user gains the safety of the device's operation, as well as the infrastructure.
Ražotājs | Lanberg | |
---|---|---|
Produkta līnija | Lanberg | |
Networking / Tips | Switch | |
Networking / Portu skaits | 16 | |
Networking / Kategorija | Network hubs and switches | |
Networking / Manageable | Nē | |
Networking / Form Factor | Rack-mountable | |
Networking / Apakštips | Fast Ethernet | |
Networking / Power Over Ethernet (PoE) | PoE+ | |
Krāsa | Melna |
Ražotāja kods | 5901969429305 |
---|---|
Produkta līnija | Lanberg |
Ražotājs | Lanberg |
Networking / Tips | Switch |
Networking / Portu skaits | 16 |
Networking / Kategorija | Network hubs and switches |
Networking / Manageable | Nē |
Networking / Form Factor | Rack-mountable |
Networking / Apakštips | Fast Ethernet |
Networking / Power Over Ethernet (PoE) | PoE+ |
Krāsa | Melna |
Dimensijas / Platums | 32 |
Dimensijas / Dziļums | 20.8 |
Dimensijas / Augstums | 4.5 |
Citi / Rack Mounting Kit | Included |
Header / Model | RSFE-16P-2C-250 |
Header / Packaged Quantity | 1 |