Eaton Tripp Lite Series Gigabit Ethernet PoE/PoE+ Extender, Water Resistant - Cat5e/6/6a, IP65, IEEE 802.3at/af, 30W, 1 Port - Network extender - 1GbE - 1000Base-T, 100Base-TX, 10Base-T - up to 100 m

This single-port connector allows you to extend the connection between your powered source device, such as a PoE (Power over Ethernet) switch, and a remote PoE device an extra 328 feet (100 meters). In addition, by cascading as many as four NPOE-EXT-1G30 extenders, you can extend that connection as far as 1640 feet (500 meters) total. Just connect the extender between two sections of Cat5e/6/6a cable up to 328 feet each.
The compact PoE/PoE+ extender delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables, eliminating the need to install new AC power lines and electrical outlets. This cost-effective extender sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. It also automatically detects PoE/PoE+ equipment and protects it from being damaged by incorrect installation.
Because this extender supports PoE, it can supply the power to operate compatible IEEE 802.3at/af PoE devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. It supports half/full-duplex 1 Gbps communication for sending and receiving data simultaneously, and protects your PoE device against short circuits and overloads.
The IP65 rating means the aluminum housing is not only 100% protected against dust, but also able to endure water spray, such as from a nozzle, from all directions. This makes the NPOE-EXT-1G30WP ideally suited to outdoor use.
No configuration or software is required to add the NPOE-EXT-1G30WP to your LAN. Just connect your switch or network jack and your PoE/PoE+ device to the shielded RJ45 Power + Data ports using existing Cat5e/6/6a cable. LEDs indicate the unit is receiving power and is ready to transmit data.
Mounting holes are featured for installing the extender on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The silver aluminum housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

• Supports Ethernet, Fast Ethernet, and Gigabit Ethernet for versatile connectivity
• IP65 water-resistant rating ensures durability in harsh environments
• Extends Ethernet connections up to 100 m, ideal for reaching remote areas
• Provides PoE and PoE+ support, enabling data and power transmission over one cable
• Plug-and-Play with wall-mountable design for easy setup and installation

• Robust connectivity
  Designed to support a wide range of Ethernet protocols including Ethernet, Fast Ethernet, and Gigabit Ethernet, this network extender ensures seamless connectivity across various network devices and speeds.
• Durable design
  With an IP65 water-resistant rating, this device is built to withstand harsh environmental conditions, making it ideal for outdoor or industrial settings where exposure to water is a potential concern.
• Extended reach
  Capable of extending Ethernet connections up to 100 m beyond the standard cable limit, this extender is perfect for expanding network coverage to remote areas of a building or outdoor locations.
• Power over Ethernet
  Supporting both PoE and PoE+, the device can transmit both data and power over a single Ethernet cable, simplifying the installation of networked devices in areas where power outlets are scarce or unavailable.
• Easy installation
  This Plug-and-Play device requires no additional software or configuration, making it easy to integrate into existing network setups while its wall-mountable design offers flexible deployment options.

This single-port connector allows you to extend the connection between your powered source device, such as a PoE (Power over Ethernet) switch, and a remote PoE device an extra 328 feet (100 meters). In addition, by cascading as many as four NPOE-EXT-1G30 extenders, you can extend that connection as far as 1640 feet (500 meters) total. Just connect the extender between two sections of Cat5e/6/6a cable up to 328 feet each.