Broadcom BCM957414A4142CC - Network adapter - PCIe 3.0 x8 - 25 Gigabit SFP28 x 2

The Broadcom BCM957414A4142CC is a dual-port 25 Gb/s or 10 Gb/s, PCI-Express Gen3 x8 Network Interface Card that supports both SFP28/SFP+ optical modules and copper-direct attach cable. The card uses the Broadcom BCM57414 25GbE MAC controller with the integrated dual-channel 25GbE SFI transceiver.

• Dual-port pluggable media interface, which may be equipped with 25GbE or 10GbE SFP28/SFP+ optical transceiver or with copper direct-attach cable
• Fully compliant to the SFF-8402 standard
• X8 PCI Express v3.0 compliant
• SR-IOV with up to 128 VFs
• Function Level Reset (FLR) support
• TruFlow flow processing engine
• Virtual Network Termination - VXLAN, NVGRE, Geneve, GRE encap/decap
• VSwitch acceleration
• Tunnel-aware stateless offloads
• DCB support: PFC, ETS, QCN, DCBx
• RDMA over converged Ethernet (RoCE)
• SMBus 2.0
• MCTP over SMBus
• PCIe-based UART and KCS
• Jumbo frames up to 9 KB
• Advanced Congestion Avoidance
• Multiqueue, NetQueue, and VMQ
• IPv4 and IPv6 offloads
• TCP, UDP, and IP checksum offloads
• Large Send Offload (LSO)
• Large Receive Offload (LRO)
• TCP Segmentation Offload (TSO)
• Receive-side Scaling (RSS)
• Transmit-side Scaling (TSS)
• VLAN insertion/removal
• Interrupt coalescing
• Network boot-PXE, UEFI
• ISCSI boot
• MSI and MSI-X
• Conforms to the PCI Express Card Electromechanical Specification Rev. 3.0

The Broadcom BCM957414A4142CC is a dual-port 25 Gb/s or 10 Gb/s, PCI-Express Gen3 x8 Network Interface Card that supports both SFP28/SFP+ optical modules and copper-direct attach cable. The card uses the Broadcom BCM57414 25GbE MAC controller with the integrated dual-channel 25GbE SFI transceiver.